Put-away suggestions tell your receivers where each incoming item should go and how many units to put there. The warehouse management system (WMS) checks current stock, open orders and free space in your picking locations, then gives the operator a clear instruction the moment they scan an item. In Bitlog WMS, this is what Suggest Inbound does. The result is faster put-away, fewer misplaced items and an inbound flow that works the same way no matter who's on shift.
Put-away mistakes are easy to miss. A box ends up in the wrong spot and nobody notices. Three days later, a picker walks to an empty picking location while the stock sits in buffer two aisles away.
Other mistakes cost time right away. An item that's already been ordered gets put on a shelf, only to be picked again an hour later.
Most warehouses rely on experience to avoid this. The receiver who's been there for eight years just knows where everything goes. That works fine until they go on vacation, or until you're growing faster than you can train new people.
A put-away suggestion is an instruction from the WMS at the moment of receiving: put this many units here, and the rest there.
Each suggestion is based on two things:
The second part is what makes the difference. A fixed rule like "headphones go in aisle 4" doesn't know that aisle 4 is full, or that three customers ordered headphones this morning. A put-away suggestion does.
A good WMS checks every incoming item in a fixed order, so the most urgent destination always comes first. In Bitlog WMS, the order is quality control, measure check, cross-dock, priority area, already sold, picking area and, last, buffer.
In practice, that means:
Here's how that works on a typical delivery. The example is made up, but the logic is the same as in Bitlog WMS.
Thirty boxes of headphones arrive at the dock. The receiver scans the first box, and the system runs through its checks:
| Check | What the system finds | Where the boxes go |
|---|---|---|
| Quality control | The item's rule says one box per delivery is inspected | 1 box to QC |
| Already sold | Some units are allocated to open orders | 4 boxes to shipping |
| Picking area | The picking location is below its refill level | 7 boxes to the picking location |
| Buffer | The rest, in pallet quantities from the item's settings | 18 boxes to buffer |
The receiver doesn't need to know any of this. They scan the item, confirm or adjust the quantity, scan the load carrier and move on.
Suggest Inbound is the Bitlog WMS module for put-away suggestions on inbound. It follows the logic described above.
The suggestion appears in the Bitlog mobile app as soon as the operator scans an item. They confirm or change the quantity, scan a load carrier and keep going. Operators can always override a suggestion.
A few features that make a difference day to day:
Suggest Inbound isn't AI. It runs on Bitlog's rule-based optimization logic, so every suggestion follows rules you can see and change.
Inbound is often where a structured process pays off first. When workwear company Vårdväskan (Color4Care) moved receiving and put-away from paper to real-time scanning with Bitlog WMS, inbound processing got more than 30% faster. The inbound work went from one and a half full-time roles to less than one.
You can get part of the way with a whiteboard and some discipline:
Once you have more rules than people can remember, it's usually time to let a system handle them.